-
Pipe Equipment Specialist offer a wide range of products specially designed for the Cable Laying industry: -
LINK SEALS are used to provide a seal between a product pipe or cable and a casing sleeve, duct or wall. LINK SEALS provide a modular hydrostatic sealing mechanism that is independent of internal or external pressure, and can provide a pressure seal up to 5 bar. LINK SEALS also provide electrical and vibrational insulation, and can provide fire resistance for up to three hours. The rubber material absorbs shocks and sounds, and reduces the vibration load on the pipes and cables. The unique link structure makes it possible to produce an almost unlimited number of sizes. Please download the data sheet to show different options available. Our sales team can advise suitable Link Seal and core hole sizes upon request. The seal is supplied in an assembled condition with the required number of links, and owing to its special design the LINK SEAL chain is rapidly installed. -
PECS (PE Coil to Straight) Connectors are a fully reusable product developed to overcome the problems encountered when passing coiled PE pipe through service cut outs whilst slip lining an existing metallic pipe using a pushing device attached to a mini digger. Please contact us for further details. -
To enable the PE Tracer to be inserted into live PE mains, via a standard Service Tee, a system has been developed that enables the cutter to be removed, and a guide tube, complete with a directional foot, to be installed under live no blow conditions. The guide tube has a low pressure glanding system as standard, but can be supplied with a medium pressure glanding system ( suitable for use at pressures up to 2 bar ) if required. Once the tracing operation has been completed the guide tube can be removed and the cutter replace, all under live no blow conditions. -
Also known as Centralisers or Spiders, this product, which can be manufactured in plastic or metal, is used to centralise or position pipe within a sleeve or carrier pipe. Please contact our sales team who will be able to advise the most suitable size/model. -
Designed to quickly and safely cut through all types of metallic pipe, including steel, ductile iton and cast iron. -
The Pipe Equipment range of Pressure Test Ends are used as a quick, simple and reliable method of providing a pressure testing facility in a plastic pipe without the need for additional fusion or mechanical fittings. -
Used to provide a temporary water and dirt seal at the end of a pipe. Useful for sealing road crossings laid prior to the main pipeline. Please contact us for prices and information. -
Designed to be bolted to the outside, or inside, of large diameter PE pipes. This is a cost effective alternative to other models where speed of installation / removal is less critical. Available in the size range 400mm to 1200mm. The Bolt-On Towing Head has been designed as a cost effective solution to the problem of obtaining a strong and reliable pulling attachment onto larger (400mm +) PE pipes of any wall thickness (SDR). It is available as a sealed, or unsealed unit making it suitable for both Directional Drilling and Slip Lining applications as well as a method of pulling PE pipes during direct burial installations. On the sealed variant the Towing Head is supplied already attached to a metre length of capped PE pipe. The unsealed variant is usually supplied as a bare unit suitable for fitting on site to a pipe section. For applications where it is not desirable to increase the outside diameter of the pipe by even a small amount, i.e. tight fit slip lining, the Bolt-On Towing Head can be manufactured to fit inside the PE pipe and therefore not increase the outside diameter at all. Please contact us for prices and information. -
The Pipe Equipment Gas-Vac™ Systems utilise a lightweight hand held venturi 'gun', powered by an on-site compressor or nitrogen bottle, to perform several different functions within the gas distribution industry. Originally devised by Operational Transco Engineers, Gas-Vac™ is predominantly utilised for service dewatering and has undergone a series of tests and field trials to ensure it meets the required safety and performance standards. -
This product accurately measures the depth of damage to the external surface of a pipe - thereby ensuring only pipes within the specification are used.Damage Indicator (Pipes from 50mm to 500mm)
-
This kit of parts is designed to enable the new pipe or duct to be used as the air supply line to a pneumatic mole, thereby avoiding any potential problems resulting from collapsed bores. Available in sizes 20mm up to 63mm. Please contact our sales team for all available options. -
This lightweight pneumatically powered cutter has been specifically designed by Pipe Equipment Specialists Ltd to quickly and safely make both longitudinal and circumferential cuts in most pipe materials particularly Ductile Iron and Steel pipe, thereby allowing a window, or section to be cut from the pipe wall to gain access to a previously inserted pipe. The cutter is suitable for pipe sizes from 40mm OD with a wall thickness up to 20mm and the standard unit will make longitudinal cuts up to 250mm (longer lengths available).Pipe Cutter Features
- Cuts Ductile Iron & Steel pipes & other materials
- Suitable for all pipes 40mm (1 1/2") upwards
- Can cut slots of up to 600mm long and 20mm deep
- Accuracy of cut with digital depth gauge
- Fast - 30 minutes to cut a complete window
- Reduces the risk of ‘white finger’
-
A long established product that will return to size or upsize the end of a PE pipe that has been reduced or deformed by Swaging, Rolldown or Folding. -
Used to easily and safely transport single pipes or strings of pipe around the job site without damage. Buggies are available as either fixed wheel or as steerable models. -
This product is designed to pull a number of smaller pipes or cables into a directionally drilled bore or into an existing pipe or duct. Please contact us for prices and information. -
Developed for the PE manufacturer, this model has been designed to quickly and simply attach the newly produced pipe to the coiling machine without damaging the internal or external surfaces. Available in the size range 90mm to 1000mm plus. Please contact us for prices and information. -
Similar to the Standard model except that this model has an additional sealing ring which will withstand an internal pressure of 10 bar. This design also prevents the ingress of dirt and fluid and the contamination of a pre-chlorinated pipe. Available in the size range 25mm to 500mm. Please contact us for prices and information. -
This towing head is fused onto the PE pipe string and features a strong sealed, but rotating, eye bolt, thus ensuring a fully sealed towing head. Suitable for directional drilling, slip lining and direct burial. Available in the size range 90mm to 500mm plus. Please contact us for prices and information.
One of The UK’s Leading Pipe Equipment Suppliers • Specialists in Pipe Equipment • Nationwide Delivery • Shop Now
