High-Quality Pipe Equipment for Sale

Pipe Products (61)
GIS/E4 Flowstop Gas Bag

Price range: £20.25 through £36.00
Flowstop Gas Bags from Pipe Equipment Specialists

Flowstop Ltd is now part of the ALH/Pipe Equipment Specialists group. Online sales and enquiries will now be managed through Pipe Equipment Specialists.

Flowstop gas bags are designed to pass through restricted openings measuring about 1/4 of the nominal pipe diameter or less.

Manufactured with a strong 4oz nylon outer cover and a flexible backbone, they are highly durable and specifically designed for gas flow-stopping applications.

Available in cylindrical and spherical shapes.

Stocked range: 3" - 12" (75mm - 300mm) – Conforms to GIS/E4 specification, available with UNF thread.

Larger range: 13" - 36" (325mm - 900mm) – Manufactured in accordance with GIS/E4 but not tested and approved to the standard. Available with UNF thread.

Made-to-order fittings: BSP and NPT thread options are available upon request.

PLEASE CONTACT US if you require additional hose length, an alternative brass tap fitting, or weight details for specific sizes.
Select options This product has multiple variants. The options may be chosen on the product page Details
Standard Towing Head

Price range: £60.00 through £1,447.00

Our original and most popular Towing Head designed to work over a range of wall thicknesses for any particular pipe size. This can be supplied with or without a rear eye and with a flat plate in place of the nose cone. The Red Nose Towing Head has been designed to reduce the weight of the Standard Towing Head in sizes 200mm and above. The nose is made from PU.

Select options This product has multiple variants. The options may be chosen on the product page Details
Inflatable Pipe Stoppers

Price range: £111.00 through £3,969.00

Can be used to seal or test all types of pipe from 35mm up to 1200mm. 1.5 bar and 2.5 bar models available. The Pipe Equipment Specialists’ range of Inflatable Pipe Stoppers can be used to seal and test all type of pipes from 35mm up to 1200mm. Two models are available – Blank and Test. Two inflation pressures – 1.5 bar and 2.5 bar. Allowable Backpressure (Test Pressure) is equal to 50% of the Inflation Pressure.** Large expansion range. Lightweight – most sizes can be installed by one person. Can be supplied with any length of inflation hose. ** Maximum inflation & back pressure figures are for stoppers fully inserted into the pipe and mechanically braced against slippage. An Inflation assembly, complete with pressure relief and pressure gauge, suitable for use with an on site compressor, can be supplied separately. A Heavy Duty Hand Pump is also available.

Select options This product has multiple variants. The options may be chosen on the product page Details
Foam Pigs

Price range: £3.40 through £403.00

Foam Pigs are used to remove dust or fluids from all pipe materials. They are generally pushed through a pipe using air or water pressure, although they can be supplied with a facility to allow them to be pulled through a pipe. Available in the size range 10mm to 1200mm. The prices online are for our basic soft foam pigs (1.5 lbs/cuft). For any bespoke pig or harder density versions, please contact our sales team.

Select options This product has multiple variants. The options may be chosen on the product page Details
Expanding Stopper / Bung

Price range: £5.80 through £301.00

Expanding Stoppers also know as drain plugs or bungs, are used for pipes and ducts in the size range from 1/2″ (12mm) to 48″ (1200mm). They are manufactured from nylon, aluminium or pressed steel (dependant on size) and are designed to prevent the ingress of water and dirt into new and existing pipes. All stoppers have a central bored shaft in the size range ½″ to 2″ (dependant upon stopper size). This shaft has an external BSP thread and is fitted with a sealing cap.

Select options This product has multiple variants. The options may be chosen on the product page Details
Test Ends

Price range: £199.00 through £618.00

The Pipe Equipment range of Pressure Test Ends are used as a quick, simple and reliable method of providing a pressure testing facility in a plastic pipe without the need for additional fusion or mechanical fittings. Available in the size range 16mm to 500mm.

Select options This product has multiple variants. The options may be chosen on the product page Details
Foam Pigs c/w Rope or Metal Eye

Price range: £33.00 through £387.00

Our range of Foam Pigs c/w Rope have been specially designed to make the installation off draw ropes and tapes into cable ducts and pipes much simpler and quicker. Once installed, the draw rope, or tape, can be use to pull in a cable or winch wire. We also offer a Foam Pig c/w Metal Eyes.

Select options This product has multiple variants. The options may be chosen on the product page Details
High & Medium Pressure Stoppers

Price range: £147.00 through £784.00

For pressure testing and temporary sealing of gas, water, oil and sewerage pipes made of steel, cast iron, clay, plastic and concrete. For maximum allowable back pressures for each size of plug, please see attached the Datasheet in the document section. Please note that plugs must be suitably braced when applying any back pressure, in order to prevent the risk of accident.

Select options This product has multiple variants. The options may be chosen on the product page Details
Cable Pulling Lubricants

Price range: £95.00 through £110.00

We supply a range of high quality water-based cable pulling lubricant for underground power and telecommunication cable installations that provide superior friction reduction and thus reducing the risk of cable damage. All types adhere perfectly to cables in wet weather and has a resistance to wash off in water filled ducts Techlube TLHD is specially designed for heavy cables and difficult cable pulls. Provides superior friction reduction between cable and all forms of duct Techlube TLMulti is a medium duty general purpose cable lubricant providing superior friction reduction in high shear and on difficult electrical utility and heavier telecommunication cable placing operations Techlube TLPHD pourable cable lubricant for medium weight and lighter cable pulling operations. Its string and cling consistency adheres perfectly to cables in all conditions. Techlube PHD can be used with electrical and telecommunication cables TL Lubaduk/M (9702A) is a BT approved lubricant conforming to MAT138A. Formulated with silicone polymers to reduce friction during installation of telecommunication and fibre-optic cable in underground subduct for both pulling and blowing cable installation methods TL Lubaduk (9702NB) is similar to above but does not contain silicone polymers and is therefore a lower cost alternative to our “M” version but still meets the British Telecom specification MAT 138A

Select options This product has multiple variants. The options may be chosen on the product page Details
Cable Rollers

Price range: £48.00 through £158.00

Here at Pipe Equipment Specialists Ltd, we offer a range of cable rollers which are suitable for a range of uses such as cable laying. Our range of cable rollers are available in a range of designs and sizes and we have something to meet the needs of all of our customers. All of the rollers for cables we offer are designed and manufactured to some of the highest industry standards. For more information on our rollers, be sure to get in touch with us. Alternatively order new cable rollers online today from Pipe Equipment Specialists Ltd.

Select options This product has multiple variants. The options may be chosen on the product page Details
Steel Bellmouths

Price range: £61.00 through £243.00

Steel Bellmouths are designed to guide a cable into a duct without damage to the cable or the duct. They are made in separable hinged halves.

Select options This product has multiple variants. The options may be chosen on the product page Details
Sliplining Swivel

Price range: £89.00 through £139.00

Double Clevis Swivel for limited rotational applications. Used in winching applications to avoid damage to the cable or product pipe as a result of twisting winch wires. The Double Clevis Swivels feature a large clevis thereby avoiding the need for ‘D’ shackles and enabling direct connection onto Pipe Equipment Towing Heads. They are used in pipe bursting operations to ease rod and blade removals in two way bursts.

Select options This product has multiple variants. The options may be chosen on the product page Details
Shackles

Price range: £8.00 through £19.00

We can supply various sizes of D Shackle’s. They are Ideal for connecting to anchor points or to other fittings. If the size you require are not shown on this page. Please contact our sales team.

Select options This product has multiple variants. The options may be chosen on the product page Details
Valve Keys

Price range: £170.00 through £2,200.00

Here at Pipe Equipment, we offer a comprehensive range of high quality valve keys to customers throughout the UK. Our valve operating keys are suitable for spindles of all shapes and sizes. The valve keys we offer are available on an individual basis or as universal key sets; which are perfect for people who work with several different types of spindle sizes or depths. No matter what type of pipe system you might be working with our valve keys are the perfect pipe equipment addition. Our range of valve operating keys can be used in a range of depths, meaning you can easily carry out work to your system or pipework. All of the pipe valve keys we offer are available to purchase online or if you have any questions about the products we offer, then please don’t hesitate to get in touch and one of our team will be more than happy to assist.

Select options This product has multiple variants. The options may be chosen on the product page Details
Solid Proving Pig

Price range: £120.00 through £874.00

Used to ‘prove’ the internal bore of a pipe or duct prior to the installation of a liner or cable. This is our Solid Nylon Proving Pig version. Also see our Steel Dumbbell Style version. We can supply any size of Proving pig. However, the diameter is normally 10% less than the ID of the pipe. If you do not see the size, you require below, please contact our sales team. We can manufacture bespoke sizes.

Select options This product has multiple variants. The options may be chosen on the product page Details
Continuous Fibreglass Rods and Accessories

Price range: £215.00 through £1,581.00

Continuous fibreglass rods, which are also known as cobras, is flexible pipe rodding. We regularly offer our fibreglass pipe rodding to customers throughout the UK. Our fibreglass rods are supplied in a metal frame and the pipe rodding is available in a range of thicknesses and lengths. The rodding we offer is available in diameters of 4.5mm, 6.7mm, 9mm, 11mm and 14mm and we can supply almost any length. All of our continuous pipe rodding equipment is designed and manufactured to some of the highest industry standards. Having offered our continuous pipe rodding to customers throughout the UK for many years, we have become well-known for the quality of products we offer. For more information on our continuous fibreglass rods please don’t hesitate to get in touch and we’ll be more than happy to assist. Alternatively order pipe rodding online today from Pipe Equipment Specialists Ltd.

Select options This product has multiple variants. The options may be chosen on the product page Details
Breakaway Connector

Price range: £17.00 through £772.00

Also know as a weak link or fuse, the Breakaway Connector is designed to prevent damage to cables and pipes resulting from excessive tensile loads.

Select options This product has multiple variants. The options may be chosen on the product page Details
Screw In Towing Head

Price range: £90.00 through £142.00

A reliable and maintenance free one piece towing head which screws into the internal bore of a plastic pipe or duct.

Select options This product has multiple variants. The options may be chosen on the product page Details
Mud Tight Towing Head

Price range: £105.00 through £580.00

Designed specifically for Directional Drilling to prevent the ingress of drilling fluid in the pipe. Available in the size range 32mm up to 500mm. Please contact us for any size not shown in the options below.

Select options This product has multiple variants. The options may be chosen on the product page Details
Dub Swivel

Price range: £674.00 through £4,851.00

This swivel is specifically designed for directional drilling applications and incorporates a number of unique and patented features which ensure it will withstand a prolonged period under load below ground.

Select options This product has multiple variants. The options may be chosen on the product page Details
Hand Pump Schrader Valve

£6.00

Flowstop Ltd are now part of the ALH/ Pipe Equipment Specialists group. Online sales and enquiries will now go through Pipe Equipment Specialists.
Hand Pump C/W Schrader Valve Connector

Add to basket Details
Brass Hand Pump

£45.00

Flowstop Ltd are now part of the ALH/ Pipe Equipment Specialists group. Online sales and enquiries will now go through Pipe Equipment Specialists.
Brass Hand Pump with 1 /4" BSP Connector.

Add to basket Details
Insertion Trumpets

Price range: £2.00 through £123.00

This cost effective simple product prevents expensive damage to PE pipes from the "cut" edge of the existing pipe during insertion. They are also used to provide permanent protection. Extensive size ranges available. Please check our data sheet to show trumpet dimensions.

Select options This product has multiple variants. The options may be chosen on the product page Details
Insulators / Centralisers

Also known as Centralisers or Spiders, this product, which can be manufactured in plastic or metal, is used to centralise or position pipe within a sleeve or carrier pipe. Please contact our sales team who will be able to advise the most suitable size/model.

Details
Duct Brushes

Price range: £42.00 through £99.00

Duct Brushes are used to remove dirt and other loose debris from inside electrical or communication ducts. They are supplied either with an eye at both ends for pulling through ducts, or with a M12 fitting for pushing through ducts using a Cobra (Flexible Fibreglass Rod). They are available to suit ducts from 2″ (50mm ) to 16″ (400mm).

Select options This product has multiple variants. The options may be chosen on the product page Details
Pull Throughs

Price range: £48.00 through £180.00

Pull Throughs, also known as Squeegees and Plungers, are used to remove fine particles and fluids from pipes. They consist of two thick rubber discs mounted on a high tensile steel central shaft with a towing eye at each end. For applications where the pipeline contains tight bends a ‘flexible’ Pull Through can be supplied. This model has a chain linking the two discs, rather than a rigid central shaft. They are suitable for use with all pipe materials and are available in the size range 2″ (50mm) to 48″ (1200mm).

Select options This product has multiple variants. The options may be chosen on the product page Details
Wire Brush Pigs

Price range: £51.00 through £205.00

Wire Brush Pigs consist of two circular wire brushes mounted onto a high tensile steel central shaft with a towing eye located at each end. They are designed to be pulled through a metal pipe to remove loose deposits and dust prior to insertion of PE pipe. They can also be used after the Pipe Scraper to remove the deposits loosened by the scrapers. They are available from stock, for all common pipe sizes up to 12″ (300mm), with larger sizes available on request. Wire brushes are also available to mount on the front of a Towing Head to allow the metal pipe to be cleaned as the new PE pipe is installed.

Select options This product has multiple variants. The options may be chosen on the product page Details
Pipe Scrapers

Price range: £80.00 through £235.00

Pipe Scrapers are designed to remove hard deposits and nodules. This type, which are also known as Christmas Tree Scrapers, are made up of a number of spring steel scrapers mounted on a high tensile steel central shaft. These scrapers remove deposits as they are winched through the pipe. The central shaft is fitted with a towing eye at each end to allow the scraper to be pulled back if necessary. They are available for all pipe sizes in the range 2″ (50mm) to 48″ (1200mm).

Select options This product has multiple variants. The options may be chosen on the product page Details
Pneumatic Hacksaw

Designed to quickly and safely cut through all types of metallic pipe, including steel, ductile iton and cast iron.

Details
Service Test End

Price range: £80.00 through £100.00

The Pipe Equipment range of Pressure Test Ends are used as a quick, simple and reliable method of providing a pressure testing facility in a plastic pipe without the need for additional fusion or mechanical fittings.

Select options This product has multiple variants. The options may be chosen on the product page Details
Rope Blowing Tee

Price range: £53.00 through £72.00

Designed for the installation of draw ropes into cable ducts. Fits onto the outlet of an Expanding Pipe Stopper. 1/2" Outlet suits Pipe Stoppers in sizes 1 1/2" to 6" 1" Outlet suits Pipe Stoppers in sizes 7" to 16" PLEASE PURCHASE SUITABLE PIPE STOPPER SEPARATELY

Select options This product has multiple variants. The options may be chosen on the product page Details
Pipe End Caps

Used to provide a temporary water and dirt seal at the end of a pipe. Useful for sealing road crossings laid prior to the main pipeline. Please contact us for prices and information.

Details
Towing Socks (Chinese Fingers)

Price range: £17.00 through £159.00

Also known as cable grips or Chinese Fingers, they are used to pull or support cables and pipes. They work on the principle of the harder the pull, the tighter the grip.

Select options This product has multiple variants. The options may be chosen on the product page Details
Bolt On Towing Head

Designed to be bolted to the outside, or inside, of large diameter PE pipes. This is a cost effective alternative to other models where speed of installation / removal is less critical. Available in the size range 400mm to 1200mm. The Bolt-On Towing Head has been designed as a cost effective solution to the problem of obtaining a strong and reliable pulling attachment onto larger (400mm +) PE pipes of any wall thickness (SDR). It is available as a sealed, or unsealed unit making it suitable for both Directional Drilling and Slip Lining applications as well as a method of pulling PE pipes during direct burial installations. On the sealed variant the Towing Head is supplied already attached to a metre length of capped PE pipe. The unsealed variant is usually supplied as a bare unit suitable for fitting on site to a pipe section. For applications where it is not desirable to increase the outside diameter of the pipe by even a small amount, i.e. tight fit slip lining, the Bolt-On Towing Head can be manufactured to fit inside the PE pipe and therefore not increase the outside diameter at all. Please contact us for prices and information.

Details
Air Test Kit

£51.00

The Air Test Kit is an "off the shelf" solution for the completion of air tests on drains and sewers in accordance with Building Regulations.

Add to basket Details
Gas-Vac™ Service Dewatering

£996.00

The Pipe Equipment Gas-Vac™ Systems utilise a lightweight hand held venturi 'gun', powered by an on-site compressor or nitrogen bottle, to perform several different functions within the gas distribution industry. Originally devised by Operational Transco Engineers, Gas-Vac™ is predominantly utilised for service dewatering and has undergone a series of tests and field trials to ensure it meets the required safety and performance standards.

Add to basket Details
Pipe Wall Damage Indicator

£436.00

This product accurately measures the depth of damage to the external surface of a pipe - thereby ensuring only pipes within the specification are used.
Damage Indicator (Pipes from 50mm to 500mm)

Add to basket Details
Oneshot Moling

This kit of parts is designed to enable the new pipe or duct to be used as the air supply line to a pneumatic mole, thereby avoiding any potential problems resulting from collapsed bores. Available in sizes 20mm up to 63mm. Please contact our sales team for all available options.

Details
Kent Precision Window Cutter
This lightweight pneumatically powered cutter has been specifically designed by Pipe Equipment Specialists Ltd to quickly and safely make both longitudinal and circumferential cuts in most pipe materials particularly Ductile Iron and Steel pipe, thereby allowing a window, or section to be cut from the pipe wall to gain access to a previously inserted pipe. The cutter is suitable for pipe sizes from 40mm OD with a wall thickness up to 20mm and the standard unit will make longitudinal cuts up to 250mm (longer lengths available).
Pipe Cutter Features

Cuts Ductile Iron & Steel pipes & other materials

Suitable for all pipes 40mm (1 1/2") upwards

Can cut slots of up to 600mm long and 20mm deep

Accuracy of cut with digital depth gauge

Fast - 30 minutes to cut a complete window

Reduces the risk of ‘white finger’
Details
Pipe Expander

A long established product that will return to size or upsize the end of a PE pipe that has been reduced or deformed by Swaging, Rolldown or Die Drawing.

Details
Plastic Mains and Service Tracer

£395.00

Used in conjunction with a standard pipe locator this simple and effective product can reliably trace both live and dead pipes and ducts.

Add to basket Details
Pipe Buggies

Price range: £255.00 through £982.00

Used to easily and safely transport single pipes or strings of pipe around the job site without damage. Buggies are available as either fixed wheel or as steerable models.

Select options This product has multiple variants. The options may be chosen on the product page Details
Nylon Air Bag

Price range: £25.00 through £50.00
Flowstop Ltd are now part of the ALH/ Pipe Equipment Specialists group. Online sales and enquiries will now go through Pipe Equipment Specialists.
Nylon Air Bags are designed to go through restricted openings measuring about 1/4 of the nominal pipe diameter or less.

Manufcature from natural rubber bladder and covered in Grey proofed nylon.

Produced in cylindrical and spherical shapes.

Standard range 1"-15" (25mm-375mm). Available with Schrader valve as standard, or brass cock as an extra

Standard range 16"-96" (400mm-2400mm).Supplied complete with ball valve.

We can also supply a Nylon Bag c/w Centre Hole

PLEASE CONTACT US IF YOU REQUIRE ADDITIONAL HOSE LENGTH OR ALTERNATIVE BRASS TAP FITTING
Select options This product has multiple variants. The options may be chosen on the product page Details
Eesiseel PVC Bags

Price range: £26.00 through £85.00
Flowstop Ltd are now part of the ALH/ Pipe Equipment Specialists group. Online sales and enquiries will now go through Pipe Equipment Specialists.
The Eesiseel range of inflatable stoppers are designed for use where there is access to the full pipe bore: Eesiseel stoppers give the following benefits:

All pipe sizes from 1.9"-12.6" (48mm-320mm) can be sealed with just five Eesiseel Stoppers.

Easy to achieve a good seal.

Easy to inflate through a self-sealing car-type Schrader valve or brass cock.

Very easy to clean.

Robust and durable: will last a long time when properly cared-for.

resistant to a large number of chemicals

We have a 4″ (100mm) stopper with a 1/2″ (12.7mm) i/d tube through the centre of the bag, used for pressure testing. Other sizes can be manufactured upon request
Select options This product has multiple variants. The options may be chosen on the product page Details
Canvas Air Bag

Price range: £24.00 through £49.00
Flowstop Ltd are now part of the ALH/ Pipe Equipment Specialists group. Online sales and enquiries will now go through Pipe Equipment Specialists.
Flowstop air bags are designed to go through restricted openings measuring about 1/4 of the nominal pipe diameter or less. Manufactured from natural rubber bladder covered in canvas.

Produced in cylindrical and spherical shapes.

Standard range 1"-15" (25mm-375mm) Available with schrader valve as standard or brass cock as an extra.

Larger range 16"-96" (400mm-2400mm) Come complete with ball valve.

PLEASE CONTACT US IF YOU REQUIRE ADDITIONAL HOSE LENGTH OR ALTERNATIVE BRASS TAP FITTING
Select options This product has multiple variants. The options may be chosen on the product page Details
Multi Puller

This product is designed to pull a number of smaller pipes or cables into a directionally drilled bore or into an existing pipe or duct. Please contact us for prices and information.

Details
PE Coiler Towing Head

Developed for the PE manufacturer, this model has been designed to quickly and simply attach the newly produced pipe to the coiling machine without damaging the internal or external surfaces. Available in the size range 90mm to 1000mm plus. Please contact us for prices and information.

Details
Pressure Tight Towing Head

Similar to the Standard model except that this model has an additional sealing ring which will withstand an internal pressure of 10 bar. This design also prevents the ingress of dirt and fluid and the contamination of a pre-chlorinated pipe. Available in the size range 25mm to 500mm. Please contact us for prices and information.

Details
PE Towing Head

This towing head is fused onto the PE pipe string and features a strong sealed, but rotating, eye bolt, thus ensuring a fully sealed towing head. Suitable for directional drilling, slip lining and direct burial. Available in the size range 90mm to 500mm plus. Please contact us for prices and information.

Details
Miniburst Pipe Bursting System
Winch placed into manhole 1. (See attached data sheet)

Winch rods inserted into old pipe from manhole 1 and connect to head in manhole 2

Head winched into old pipe, which is broken and displaced

New Pipe is located in shield on rear of head and held in place by simple tensioning device.

Head is again winched forward. New pipes are snapped together behind the head as it is winched forward.

Above step is repeated until full length is in place.
Details

Pipe Products (61)

Damage Indicator (Pipes from 50mm to 500mm)

Pipe Cutter Features