-
Expanding Stoppers also know as drain plugs or bungs, are used for pipes and ducts in the size range from 1/2″ (12mm) to 48″ (1200mm). They are manufactured from nylon, aluminium or pressed steel (dependant on size) and are designed to prevent the ingress of water and dirt into new and existing pipes. All stoppers have a central bored shaft in the size range ½″ to 2″ (dependant upon stopper size). This shaft has an external BSP thread and is fitted with a sealing cap. -
Foam Pigs are used to remove dust or fluids from all pipe materials. They are generally pushed through a pipe using air or water pressure, although they can be supplied with a facility to allow them to be pulled through a pipe. Available in the size range 10mm to 1200mm. The prices online are for our basic soft foam pigs (1.5 lbs/cuft). For any bespoke pig or harder density versions, please contact our sales team. -
Our range of Foam Pigs c/w Rope have been specially designed to make the installation off draw ropes and tapes into cable ducts and pipes much simpler and quicker. Once installed, the draw rope, or tape, can be use to pull in a cable or winch wire. We also offer a Foam Pig c/w Metal Eyes. -
Also known as cable grips or Chinese Fingers, they are used to pull or support cables and pipes. They work on the principle of the harder the pull, the tighter the grip. -
Our original and most popular Towing Head designed to work over a range of wall thicknesses for any particular pipe size. This can be supplied with or without a rear eye and with a flat plate in place of the nose cone. The Red Nose Towing Head has been designed to reduce the weight of the Standard Towing Head in sizes 200mm and above. The nose is made from PU. -
Duct Brushes are used to remove dirt and other loose debris from inside electrical or communication ducts. They are supplied either with an eye at both ends for pulling through ducts, or with a M12 fitting for pushing through ducts using a Cobra (Flexible Fibreglass Rod). They are available to suit ducts from 2″ (50mm ) to 16″ (400mm). -
Designed for the installation of draw ropes into cable ducts. Fits onto the outlet of an Expanding Pipe Stopper. 1/2" Outlet suits Pipe Stoppers in sizes 1 1/2" to 6" 1" Outlet suits Pipe Stoppers in sizes 7" to 16" PLEASE PURCHASE SUITABLE PIPE STOPPER SEPARATELY -
This cost effective simple product prevents expensive damage to PE pipes from the "cut" edge of the existing pipe during insertion. They are also used to provide permanent protection. Extensive size ranges available. Please check our data sheet to show trumpet dimensions. -
The Pipe Equipment range of quick fit service Nose Cones has been specially developed to provide a cone shape on to the leading end of a new PE pipe which is to be inserted into an existing pipe or duct. They also prevent pipe end damage and internal contamination of the PE pipe during insertion. -
The Eesiseel range of inflatable stoppers are designed for use where there is access to the full pipe bore: Eesiseel stoppers give the following benefits:
Flowstop Ltd are now part of the ALH/ Pipe Equipment Specialists group. Online sales and enquiries will now go through Pipe Equipment Specialists.- All pipe sizes from 1.9"-12.6" (48mm-320mm) can be sealed with just five Eesiseel Stoppers.
- Easy to achieve a good seal.
- Easy to inflate through a self-sealing car-type Schrader valve or brass cock.
- Very easy to clean.
- Robust and durable: will last a long time when properly cared-for.
- resistant to a large number of chemicals
- We have a 4″ (100mm) stopper with a 1/2″ (12.7mm) i/d tube through the centre of the bag, used for pressure testing. Other sizes can be manufactured upon request
-
Canvas air bags are designed to go through restricted openings measuring about 1/4 of the nominal pipe diameter or less. Manufactured from natural rubber bladder covered in canvas.- Produced in cylindrical and spherical shapes.
- Standard range 1"-15" (25mm-375mm). Available with Schrader valve as standard or a brass cock as an extra.
- Larger range 16"-96" (400mm-2400mm). Come complete with ball valve.
-
We supply a range of high quality water-based cable pulling lubricant for underground power and telecommunication cable installations that provide superior friction reduction and thus reducing the risk of cable damage. All types adhere perfectly to cables in wet weather and has a resistance to wash off in water filled ducts Techlube TLHD is specially designed for heavy cables and difficult cable pulls. Provides superior friction reduction between cable and all forms of duct Techlube TLMulti is a medium duty general purpose cable lubricant providing superior friction reduction in high shear and on difficult electrical utility and heavier telecommunication cable placing operations Techlube TLPHD pourable cable lubricant for medium weight and lighter cable pulling operations. Its string and cling consistency adheres perfectly to cables in all conditions. Techlube PHD can be used with electrical and telecommunication cables TL Lubaduk/M (9702A) is a BT approved lubricant conforming to MAT138A. Formulated with silicone polymers to reduce friction during installation of telecommunication and fibre-optic cable in underground subduct for both pulling and blowing cable installation methods TL Lubaduk (9702NB) is similar to above but does not contain silicone polymers and is therefore a lower cost alternative to our “M” version but still meets the British Telecom specification MAT 138A -
Here at Pipe Equipment Specialists Ltd, we offer a range of cable rollers which are suitable for a range of uses such as cable laying. Our range of cable rollers are available in a range of designs and sizes and we have something to meet the needs of all of our customers. All of the rollers for cables we offer are designed and manufactured to some of the highest industry standards. For more information on our rollers, be sure to get in touch with us. Alternatively order new cable rollers online today from Pipe Equipment Specialists Ltd. -
Nylon Air Bags are designed to go through restricted openings measuring about 1/4 of the nominal pipe diameter or less.Flowstop Ltd are now part of the ALH/ Pipe Equipment Specialists group. Online sales and enquiries will now go through Pipe Equipment Specialists.- Manufcature from natural rubber bladder and covered in Grey proofed nylon.
- Produced in cylindrical and spherical shapes.
- Standard range 1"-15" (25mm-375mm). Available with Schrader valve as standard, or brass cock as an extra
- Standard range 16"-96" (400mm-2400mm).Supplied complete with ball valve.
- We can also supply a Nylon Bag c/w Centre Hole
-
Can be used to seal or test all types of pipe from 35mm up to 1200mm. 1.5 bar and 2.5 bar models available. The Pipe Equipment Specialists’ range of Inflatable Pipe Stoppers can be used to seal and test all type of pipes from 35mm up to 1200mm. Two models are available – Blank and Test. Two inflation pressures – 1.5 bar and 2.5 bar. Allowable Backpressure (Test Pressure) is equal to 50% of the Inflation Pressure.** Large expansion range. Lightweight – most sizes can be installed by one person. Can be supplied with any length of inflation hose. ** Maximum inflation & back pressure figures are for stoppers fully inserted into the pipe and mechanically braced against slippage. An Inflation assembly, complete with pressure relief and pressure gauge, suitable for use with an on site compressor, can be supplied separately. A Heavy Duty Hand Pump is also available. -
Used to ‘prove’ the internal bore of a pipe or duct prior to the installation of a liner or cable. This is our Solid Nylon Proving Pig version. Also see our Steel Dumbbell Style version. We can supply any size of Proving pig. However, the diameter is normally 10% less than the ID of the pipe. If you do not see the size, you require below, please contact our sales team. We can manufacture bespoke sizes. -
Pull Throughs, also known as Squeegees and Plungers, are used to remove fine particles and fluids from pipes. They consist of two thick rubber discs mounted on a high tensile steel central shaft with a towing eye at each end. For applications where the pipeline contains tight bends a ‘flexible’ Pull Through can be supplied. This model has a chain linking the two discs, rather than a rigid central shaft. They are suitable for use with all pipe materials and are available in the size range 2″ (50mm) to 48″ (1200mm). -
These dual sized glands are suitable for insertion of either the PE Tracer, or the Tracer Rod, into low pressure gas and water services. Each gland contains sealing arrangements for ¾” and 1” BSP threads, and ¾” and 1” gas meter threads. -
GIS E4 Gas Bag from Pipe Equipment Specialists
The GIS E4 gas bag is designed to pass through restricted openings measuring about 1/4 of the nominal pipe diameter or less.
Manufactured by our sister company Flowstop, with a strong 4oz nylon outer cover and a flexible backbone, they are highly durable and specifically designed for gas flow-stopping applications.
Available in cylindrical and spherical shapes.
- Stocked range: 3" - 12" (75mm - 300mm) – Conforms to GIS/E4 specification, available with UNF thread.
- Larger range: 13" - 36" (325mm - 900mm) – Manufactured in accordance with GIS/E4 but not tested and approved to the standard. Available with UNF thread.
- Made-to-order fittings: BSP and NPT thread options are available upon request.
PLEASE CONTACT US if you require additional hose length, an alternative brass tap fitting, or weight details for specific sizes.
Flowstop Ltd is now part of the ALH/Pipe Equipment Specialists group. Online sales and enquiries will now be managed through Pipe Equipment Specialists.
-
We can supply various sizes of D Shackle’s. They are Ideal for connecting to anchor points or to other fittings. If the size you require are not shown on this page. Please contact our sales team. -
Steel Bellmouths are designed to guide a cable into a duct without damage to the cable or the duct. They are made in separable hinged halves. -
Wire Brush Pigs consist of two circular wire brushes mounted onto a high tensile steel central shaft with a towing eye located at each end. They are designed to be pulled through a metal pipe to remove loose deposits and dust prior to insertion of PE pipe. They can also be used after the Pipe Scraper to remove the deposits loosened by the scrapers. They are available from stock, for all common pipe sizes up to 12″ (300mm), with larger sizes available on request. Wire brushes are also available to mount on the front of a Towing Head to allow the metal pipe to be cleaned as the new PE pipe is installed. -
The Air Test Kit is an "off the shelf" solution for the completion of air tests on drains and sewers in accordance with Building Regulations. -
Double Clevis Swivel for limited rotational applications. Used in winching applications to avoid damage to the cable or product pipe as a result of twisting winch wires. The Double Clevis Swivels feature a large clevis thereby avoiding the need for ‘D’ shackles and enabling direct connection onto Pipe Equipment Towing Heads. They are used in pipe bursting operations to ease rod and blade removals in two way bursts. -
Used in conjunction with a standard pipe locator this simple and effective product can reliably trace both live and dead pipes and ducts. -
The Pipe Equipment Pipe Support Rollers have been specially designed to ease the problems of handling plastic pipes during jointing and installation. They greatly reduce the chances of pipe damage as a result of the pipe string being trailed along the ground and keep pipe drag to a minimum. Pipe Support Rollers are available as ‘Free Standing’ or ‘In Trench’. -
Pipe Scrapers are designed to remove hard deposits and nodules. This type, which are also known as Christmas Tree Scrapers, are made up of a number of spring steel scrapers mounted on a high tensile steel central shaft. These scrapers remove deposits as they are winched through the pipe. The central shaft is fitted with a towing eye at each end to allow the scraper to be pulled back if necessary. They are available for all pipe sizes in the range 2″ (50mm) to 48″ (1200mm). -
Designed specifically for Directional Drilling to prevent the ingress of drilling fluid in the pipe. Available in the size range 32mm up to 500mm. Please contact us for any size not shown in the options below. -
The Pipe Equipment range of Pressure Test Ends are used as a quick, simple and reliable method of providing a pressure testing facility in a plastic pipe without the need for additional fusion or mechanical fittings. Available in the size range 16mm to 500mm. -
Hand Pump C/W Schrader Valve ConnectorFlowstop Ltd are now part of the ALH/ Pipe Equipment Specialists group. Online sales and enquiries will now go through Pipe Equipment Specialists. -
This glanding system, which has been tested at pressures up to 7 bar, is most suited for insertion of the Tracer Rod into gas and water mains and services. The gland rubber, which is about 25mm thick, can be compressed during use to increase the seal and prevent leakage. It has a 1” BSP internal thread as standard and is supplied with an adaptor to suit ¾” BSP. An adaptor to suit ¾” and 1” gas meter thread is also available Tracer Gland MP 3/4" & 1" BSP Thread -
A reliable and maintenance free one piece towing head which screws into the internal bore of a plastic pipe or duct. -
Here at Pipe Equipment, we offer a comprehensive range of high quality valve keys to customers throughout the UK. Our valve operating keys are suitable for spindles of all shapes and sizes. The valve keys we offer are available on an individual basis or as universal key sets; which are perfect for people who work with several different types of spindle sizes or depths. No matter what type of pipe system you might be working with our valve keys are the perfect pipe equipment addition. Our range of valve operating keys can be used in a range of depths, meaning you can easily carry out work to your system or pipework. All of the pipe valve keys we offer are available to purchase online or if you have any questions about the products we offer, then please don’t hesitate to get in touch and one of our team will be more than happy to assist. -
For pressure testing and temporary sealing of gas, water, oil and sewerage pipes made of steel, cast iron, clay, plastic and concrete. For maximum allowable back pressures for each size of plug, please see attached the Datasheet in the document section. Please note that plugs must be suitably braced when applying any back pressure, in order to prevent the risk of accident. -
Continuous fibreglass rods, which are also known as cobras, is flexible pipe rodding. We regularly offer our fibreglass pipe rodding to customers throughout the UK. Our fibreglass rods are supplied in a metal frame and the pipe rodding is available in a range of thicknesses and lengths. The rodding we offer is available in diameters of 4.5mm, 6.7mm, 9mm, 11mm and 14mm and we can supply almost any length. All of our continuous pipe rodding equipment is designed and manufactured to some of the highest industry standards. Having offered our continuous pipe rodding to customers throughout the UK for many years, we have become well-known for the quality of products we offer. For more information on our continuous fibreglass rods please don’t hesitate to get in touch and we’ll be more than happy to assist. Alternatively order pipe rodding online today from Pipe Equipment Specialists Ltd. -
This swivel is specifically designed for directional drilling applications and incorporates a number of unique and patented features which ensure it will withstand a prolonged period under load below ground. -
The Pipe Equipment Flexible Tracer Rod has been designed to easily locate underground plastic pipes ducts and hoses. It can be used in both Mains and Services (live or dead). -
The PE Pipe Rotary Scraper 63-400mm for Electrofusion is a high-performance surface preparation tool designed for the fast, accurate, and consistent scraping of PE and PP pipes prior to the electrofusion welding process. Suitable for pipe diameters from 63mm to 400mm up to SDR17, this fully automatic rotary scraper ensures the correct removal of the pipe’s oxidised outer layer, creating the ideal surface for reliable electrofusion joints.
Engineered for professional pipeline installation and maintenance applications, the scraper operates as an automatic hand-driven tool that securely clamps onto the outer wall of the pipe and rotates smoothly around it. During operation, the tool peels away a predefined thickness of material to achieve precise and uniform surface preparation, helping improve fusion quality and reduce the risk of joint failure.
-
The PE Pipe Variclamp for EF Couplers, Reducers and Elbows 16-63mm is a versatile and reliable alignment tool designed to restrain and position PE pipes accurately before and during the electrofusion process. Suitable for service connection pipe applications, this advanced clamp system ensures secure pipe alignment, helping installers achieve high-quality electrofusion joints with improved consistency and reduced installation errors.
Designed for use with pipe sizes ranging from 16mm to 63mm, the Variclamp is compatible with 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, and 63mm PE pipes. The adjustable arm configuration allows different pipe sizes to be selected on each side of the clamp, making it ideal for reducer fittings and varying pipe combinations commonly used in utility and service pipe installations.
-
PE Pipe Saddle Clamp 32-250mm is a durable and efficient clamping tool designed to securely hold saddles and tapping tees onto PE pipe during the electrofusion process. Suitable for pipe sizes from 32mm to 250mm, this specialist clamp ensures the correct pressure is maintained before, during, and after fusion, helping to achieve strong, reliable joints across water, gas, wastewater, and industrial PE pipe systems.
Designed for use with tapping saddles, tapping tees, branch saddles, and purge saddles, the clamp provides stable and accurate positioning throughout the electrofusion heating and cooling cycles. By preventing movement or lifting of the fitting during installation, the tool helps improve fusion quality and reduce the risk of joint failure on-site.
-
The PE Pipe Saddle Clamp 32-500mm is a reliable and easy-to-use tool designed to securely hold electrofusion saddles/ tees onto PE pipes at the correct pressure before and during the fusion process. Suitable for pipe sizes up to 500mm, this versatile clamp is widely used across water, wastewater, gas, and industrial PE pipeline systems where accurate saddle/tee positioning and consistent fusion pressure are essential.
Also known as a top loading clamp or electrofusion saddle clamp, the tool is specifically engineered to prevent saddle/ tee fittings from lifting during the heating and cooling cycles of the electrofusion process. By maintaining stable and even pressure throughout installation, the clamp helps ensure a high-quality fusion joint and reduces the risk of installation failure.
-
PE Pipe Debeader, External Debeader 400- 1200 mm is specifically designed for the fast and efficient removal of external beads from completed butt-fusion welded PE pipe joints. Suitable for pipe sizes from 400 mm to 1200mm, these robust tools deliver clean, accurate bead removal without damaging the pipe surface, making them ideal for gas, water, and industrial pipeline applications.
Engineered for ease of use, the debeader is knocked directly onto the weld bead while precision alignment blocks slide smoothly along the pipe surface to guide the tool around the pipe circumference. The specially shaped cutting blade cuts cleanly beneath the weld bead, while the ergonomic handle provides excellent control and leverage, allowing the operator to remove the bead quickly and safely.
-
PE Pipe Debeader, External Debeader 90-400mm is specifically designed for the fast and efficient removal of external beads from completed butt-fusion welded PE pipe joints. Suitable for pipe sizes from 90 mm to 400mm, these robust tools deliver clean, accurate bead removal without damaging the pipe surface, making them ideal for gas, water, and industrial pipeline applications.
Engineered for ease of use, the debeader is knocked directly onto the weld bead while precision alignment blocks slide smoothly along the pipe surface to guide the tool around the pipe circumference. The specially shaped cutting blade cuts cleanly beneath the weld bead, while the ergonomic handle provides excellent control and leverage, allowing the operator to remove the bead quickly and safely.
-
PE Pipe Debeader, External Debeader 63-125mm is specifically designed for the fast and efficient removal of external beads from completed butt-fusion welded PE pipe joints. Suitable for pipe sizes from 63mm to 125mm, these robust tools deliver clean, accurate bead removal without damaging the pipe surface, making them ideal for gas, water, and industrial pipeline applications.
Engineered for ease of use, the debeader is knocked directly onto the weld bead while precision alignment blocks slide smoothly along the pipe surface to guide the tool around the pipe circumference. The specially shaped cutting blade cuts cleanly beneath the weld bead, while the ergonomic handle provides excellent control and leverage, allowing the operator to remove the bead quickly and safely.
-
The PE Pipe Squeeze Off tool (63-125 mm SDR 11 PE Pipe) is a robust and reliable solution designed for safely restricting the flow of gas or water in plastic pipe systems during maintenance and repair work. Engineered to meet the demanding standards of utility and pipeline professionals, these tools operate in accordance with the UK National Grid specification GIS/PL2-7, ensuring safe and controlled pipe squeeze-off procedures every time.
Designed for polyethylene (PE) pipes (63, 90, 110 and 125 SDR 11/17.6), the tool works by compressing the pipe between two parallel squeeze bars. The upper bar is operated manually via a durable tee handle, allowing technicians to apply controlled pressure with ease and precision. This simple yet effective mechanism temporarily shuts off the flow within the pipe, enabling repairs, installations, or maintenance tasks to be completed without a full system shutdown.
-
The PE Pipe Squeeze Off tool (16-32mm SDR 11 PE Pipe) is a robust and reliable solution designed for safely restricting the flow of gas or water in plastic pipe systems during maintenance and repair work. Engineered to meet the demanding standards of utility and pipeline professionals, these tools operate in accordance with the UK National Grid specification GIS/PL2-7, ensuring safe and controlled pipe squeeze-off procedures every time.
Designed for polyethylene (PE) pipes of sizes 16, 20,25 and 32mm, the tool works by compressing the pipe between two parallel squeeze bars. The upper bar is operated manually via a durable tee handle, allowing technicians to apply controlled pressure with ease and precision. This simple yet effective mechanism temporarily shuts off the flow within the pipe, enabling repairs, installations, or maintenance tasks to be completed without a full system shutdown.
-
The PE Pipe Squeeze Off tool (20-63mm SDR 11 PE Pipe) is a robust and reliable solution designed for safely restricting the flow of gas or water in plastic pipe systems during maintenance and repair work. Engineered to meet the demanding standards of utility and pipeline professionals, these tools operate in accordance with the UK National Grid specification GIS/PL2-7, ensuring safe and controlled pipe squeeze-off procedures every time.
Designed for polyethylene (PE) pipes, the tool works by compressing the pipe between two parallel squeeze bars. The upper bar is operated manually via a durable tee handle, allowing technicians to apply controlled pressure with ease and precision. This simple yet effective mechanism temporarily shuts off the flow within the pipe, enabling repairs, installations, or maintenance tasks to be completed without a full system shutdown.
-
Also know as a weak link or fuse, the Breakaway Connector is designed to prevent damage to cables and pipes resulting from excessive tensile loads. -
Flowstop Ltd are now part of the ALH/ Pipe Equipment Specialists group. Online sales and enquiries will now go through Pipe Equipment Specialists.
Brass Hand Pump with 1 /4" BSP Connector. -
- Winch placed into manhole 1. (See attached data sheet)
- Winch rods inserted into old pipe from manhole 1 and connect to head in manhole 2
- Head winched into old pipe, which is broken and displaced
- New Pipe is located in shield on rear of head and held in place by simple tensioning device.
- Head is again winched forward. New pipes are snapped together behind the head as it is winched forward.
- Above step is repeated until full length is in place.
One of The UK’s Leading Pipe Equipment Suppliers • Specialists in Pipe Equipment • Nationwide Delivery • Shop Now
